Household Fan Blade plastic injection mould
|Terms of Trade:||FOB,CFR,CIF,FCA|
|Min. Order:||1set Set/Sets|
|Delivery Time:||60 Days|
|Place of Origin:||China|
Model No.: CT-1085
Ceeto Molding Company provides customer with high quality plastic fan blade injection moulds which are very common to be used to produce all kinds of plastic fan blade products and airflow ventilator fan products. Fan blade product is widely applied in indoor and outdoor Air conditioner, automotive fan, and household table fan and any other types of fans in our daily lifes. Basically we design and manufacture Plastic Fan Blade mould according to your 2D and 3D fan blade product, you review and approve plastic fan blade mould design, at the same time, we submit you moldflow analysis report, DFM report and mould assembly drawing and mould 3D drawing.
Plastic Fan Blade Injection Mould Technical Description
- Mould cavity: single cavity
- Mould base: LKM
- Mould cavity and core steel: 1.2738, P20, 718H or any other steel if you would prefer to use according to mould life time
- Mould standard components: DME, HASCO, LKM, MISUMI, PUNCH
- Plastic Injection material: PP, ABS, ABS/PC, PA, PA66+30GF etc.
- Hot runner system: Yudo, Synventive, HRS etc. or cold runner as per product structure.
- Mould 3D Design Software: UG, PRO/E, Solidworks
- Leadtime: 60 days
- Mould Packing: wooden box
The key point for plastic fan blade is how to keep dynamic balance, so machining precision is very important, draft angle must be well considered in order to have good demoulding according to shrinkage rate of plastic material that you specified during mould design stage. Wall thickness is not even due to fan blade structure, mould design engineer should consider well not to design push pins on the mould.
Reinforcement ribs must be well considered to design in plastic fan blade mould, hub core is designed solid type as follows:
This kind of moul design concept is better to guarantee fan blade to be in the center when assembly a fan, and more over it's easier for plastic fan blade mould to do the heat treatment. Solid hub core has the following advantages:
- Molding solid hub core is very strong
- Mould to be dismantled and assembled are much more easier
- Mould components are less than that of complicated mould design
- The split lines on fan blade product surface are less than that of complicated mould desgin
- Mould full dimension can be reduced
Plastic fan blade injection mould gate design is very important for melt plastic to keep filling the balance of product, direct gate is our first consideration. It can go fast and flow even to avoid welding line evidence.
Our processing for making plastic fan blade injection mould
When we receive your official purchasing order of plastic fan blade injection mould, we will set up an internal meeting with mould designer, Project Manager, Production Manager, Project Manager will be in charge of the whole program since this design stage to mould shipment after mould inspection approval, and report to you mould design progress and machining processing progress with weekly report which means that he or she will report you very week about jobs that we do on this program, here is weekly report showing you dynamic timing chart:
Quality Control For Plastic Fan Blade Injection Mould
When we receive mould steel blocks, we ask for steel certification and steel inspection by ourselves, when we make the first mould tryout, we measure plastic sample parts using calipers and CMM measuring equipments, we also measure the critical dimensions on plastic fan blade injection moulds and analyze the reasons of all the "NG" points on measuring reports, we will share these reports with you and find solutions together with you to improve moulds. Here is example of measuring report for mould:
We warmly welcome you to send out an inquiry to us, we will give you mould cost in details with our professional working procedures and strict program management, if you have any technical questions, please don't hesitate to keep us informed, looking forward to hearing from you, thank you very much.
Zhejiang Ceeto Molding Technology Co.,Ltd.
Zhejiang Ceeto Molding Technology Co.,Ltd., registed in year 2011, which has a strong group members mould and processing experts which have rich experience in design and manufacturing Plastic Injection moulds, die casting moulds and stamping moulds. Ceeto Molding provides customer with high quality injection moulds and products , die casting products and stamping moulds mainly in Automotive field, Home appliance field, Daily commodity field etc.with reasonable price. Building area is 22000 square meters. Currently, we have employee 380 and 10 Program Engineers are in charge of projects according to customers from different global regions, 30 technical engineerings who are having much experience in designing and developing Mold 2D assembly drawings & Mold 3D designs.
Our yearly output molds are about 600 sets not including products.
In Recent years, Ceeto Company has been introducing not only advanced manufacturing equipments, but also a large number of talents, As a result, the manufacturing level has reached to the international advanced level, and we have also gained the majority of customers' trust and respect.
Ceeto Company sincerely hopes that with the principle of "To be honest men and to do things sincerely ", we could fully expert our advantages and rich manufacturing experience to provide the customers with higher-level and higher-quality products and better service.
- Company Name: Zhejiang Ceeto Molding Technology Co.,Ltd.
- Representative: WANG JUAN
- Product/Service: Automotive Plastic Injection Mould , Home Appliance Plastic Injection Mould , Daily Commodity Plastic Injection Mould , Medical Plastic Injection Mould , Die Casting Moulds and Products , Stamping Die and Prodcuts
- Capital (Million US $): 10,000,000RMB
- Year Established: 2018
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 2
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No.78 Baiyunshan Road, Ningbo,China
- Contact Person: Ms. Jenny Wang
- Tel: 86-574-86863623